Water won't drain
Dirty water stays in the bottom after the cycle finishes.
Usuallyfilterdrain pumpdrain hose
Dishwasher repair
Built-in, panel-ready and compact dishwashers
When dishes come out dirty, water sits in the tub or a leak appears under the counter, the technician tests the fill, wash and drain stages and tells you which part failed and what it takes to fix.
A typical diagnosis
ExampleSymptoms
Many complaints trace back to a dirty filter, so rinse it before calling. These are the faults that remain once it's clean.
Dirty water stays in the bottom after the cycle finishes.
Usuallyfilterdrain pumpdrain hose
Food stuck to plates, or grit left inside cups.
Usuallyspray armswash motorwater temperature
Water reaches the floor in front of the dishwasher during a cycle.
Usuallydoor gasketspray armoverfill
A white film that builds up over several loads.
Usuallyhard well waterrinse aidsoftener setting
Dishes come out wet and the end of the cycle feels cool.
Usuallyheating elementthermostatvent
Lights come on but nothing runs, or it quits partway through.
Usuallydoor latchcontrol boardfloat switch
Typical causes
Each cycle depends on water coming in, heating, spraying and draining. A fault at any stage shows up as one of the symptoms above.
Food scraps and broken glass collect in the sump and can stall the pump. A kinked hose behind the unit has the same effect.
Signs you'll see
Standing water, a gurgling noise, a drain code.
How it's confirmed
The filter, sump and hose are checked first, then the pump is tested.
The wash motor drives water up through the arms, and the jets clog over time with hard-water scale and food bits, which weakens the spray.
Signs you'll see
Grimy plates on the top rack while the bottom rack comes out clean.
How it's confirmed
The arms are removed and inspected, and the motor is tested under power.
The gasket seals the tub, and the latch tells the control board the door is closed. Wear on either causes leaks or a dishwasher that won't start.
Signs you'll see
Water at the front edge, a door that needs a push before it starts.
How it's confirmed
The gasket is inspected for tears and the latch switch is tested.
Washing every dish by hand again? Book a dishwasher visit.
Book dishwasher repair in Clearview, ONService area
Calls come in from Stayner, Creemore, Duntroon and the rural roads between them, many from homes on private wells where hard water is part of the problem.
Fridge or oven playing up as well? Head to appliance repair in Clearview, ON.
Communities in Clearview Township
About once a month, or more often if you load dishes without scraping them.
A clogged filter, a kinked drain hose or a failing drain pump. Clean the filter first; if the water remains, book a diagnosis.
Over time, yes. Minerals coat the spray arms and heating element. Rinse aid and the correct hardness setting slow the build-up.
No. Shut the water valve under the sink and wait for the repair.
Yes. Mention the custom panel when you book, since removing it adds time to the visit.
Book a visit
Send your details and we'll call to book a time. If it's leaking, close the valve under the sink first.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
Thanks, your request is in
We'll call you shortly to arrange a time. Need to talk now? Phone (249) 402-5201.